Seat Tube/Floor Fittings
Our Seat Tube and Floor Fittings are lightweight yet extremely robust and simplicity itself to operate.
The recessed floor fitting incorporates a swivelling ring for use with cargo tie-down devices or webbing, and a stud on which the seat tube fitting is located.
The Seat Tube Fitting is easily assembled onto a seat leg or any tubular device such as an incubator etc. and quickly snaps onto the stud of the floor fitting.
Further lashings can be fixed or tied to the swivelling ring if required.
Simple to Operate / Quick to Release
The Seat Tube Fitting quickly snaps on to the stud of the floor fitting which allows land, sea and air transporters to be changed from cargo carrying to passenger carrying in minutes.
Fold Away Cargo Ring
Lashings can be fixed or tied on to the swivelling ring if required. The Cargo Ring folds away into the recess of the floor fitting when not in use.
We coat all surfaces with high technology defence standard finishes for maximum endurance.
|Specification - Floor fitting||Specification - Seat tube fitting|
|Floor Fitting Part No:||53CA16||Floor Fitting Part No:||51CA16|
|Proof Load:||1,200 lb (544 kg)||Proof Load:||1,200 lb (544 kg)|
|Ultimate Design Load:||1,800 lb (816 kg)||Ultimate Design Load:||1,800 lb (816 kg)|
|Weight:||6 oz (0.17 kg)||Weight:||3 oz (0.08 kg)|