HV Inc. offers the most portable, affordable, and easy to use VLF Hipots available. HV Inc offers the largest selection of models in the world, with ratings from 30kV – 200kV with load ratings from 0.4μF – 50μF. Since 1998, HV Inc has been the world’s leading source for VLF test equipment.

VLF Hipot

A VLF Hipot is an AC output tester but with an output frequency of 0.1Hz or lower rather than 50Hz. Although the frequency is very low, it is still an alternating current with polarity reversals every half cycle. At 0.1Hz output, rather than 50Hz, it takes 500 times less current and power to apply an AC voltage to a capacitive load, like a long cable. There is no better way to verify the AC integrity of a cable than to Hipot it with AC voltage. VLF Hipots can also be used as the voltage source for Tan Delta and Partial Discharge diagnostic cable testing.

VLF HIPOT

VLF-34E

A new generation VLF AC Hipot that uses a solid-state design with microprocessor controls. It meets the requirements of applicable world standards regarding cable testing up to 25kV class Maintenance testing. It is light, compact, rugged and very portable. Its sine wave output is suitable for using optional external PD and TD detection equipment.

VLF-65E

The VLF-65E Test Set is the latest addition to the new generation of VLF AC Hipots from HV Inc that uses a dry-type, air cooled, solid state design with microprocessor control. Its test programming, numerous output functions, wireless communications and data retrieval are intuitive and easy to learn, as well as its PC Application software. It is portable, affordable and built for the rigors of field use.

VLF-4022CM(F)

This model, with its 44kVac peak output, is suitable for all testing of 25kV cable and Maintenance testing on 35kV cable. Its high load capacity enables it to test up to approximately 16km of cable (at 0.02Hz), depending on type. This model includes a charging current and load capacitance meter, and a centre zero peak kilovolt output meter.

VLF-50CM(F)

The VLF-50CMF is the highest power VLF unit we offer. It is rated for 5μF at 0.1Hz and can increase its output to 50μF at 0.01Hz, capable of testing up to 80km of 15kV and 25kV cable. It is ideal for very long cable runs, like long feeders, wind farm applications, submarine cables, and others. It comes as pictured, including cable reels with 30m of high voltage and ground cable.

VLF-6022CM(F)

This model, with its 60kVac peak output, is suitable for testing cables rated up to 35kV. Its high load capacity enables it to test up to approximately 16km of cable, depending on type. This model includes an enhanced features package: a charging current and load capacitance meter, test dwell timer and polarity indicating lights.

VLF-65CM(F)

The VLF-65CMF is a higher power model designed to test very long cables rated up to 35kV. It offers the complete controls package including Cable Burn mode. Its cable reels provide 30m of HV and ground cable.

VLF-90CM(F)

The VLF-90CMF offers 90kVac peak output voltage, suitable for testing cables rated 45 – 50kV. It is load rated for 0.55μF @ 0.1Hz, capable of testing up to 3km of cable, five times that at 0.02Hz. Pictured with optional hand truck.

VLF-12011CM(F)

The VLF-12011CMF provides a 200kVac peak output voltage, suitable for performing VLF Hipot tests on 138kV cable and as a voltage source for Tan Delta and Partial Discharge testing on 230kV cable. The controls offer all the features of our other VLF models along with VLF Cable Burning. Trailer mount optional.

VLF-200CM(F)

The VLF-200CMF provides a 200kVac peak output voltage, suitable for performing VLF hipot tests on 138kV cable and as a voltage source for Tan Delta and Partial Discharge testing on 230kV cable. The controls offer all the features of our other VLF models along with VLF Cable Burning. Trailer mount optional.